On this page you will find;
Panels - Timber & Concrete Posts - Gates & Furniture
Kent Lap
 Kent lap panels are a pressure treated fully framed. A durable panel, with the same front and back view, these panels have 3 battons either side. The perfect panel for most domestic applications with prices starting from £11.25+vat
Available treated brown in these sizes; Also available on request are half sizes, i.e 6' Wide - 5'6" or 4'6" Tall.
- 6X6
- 6X5
- 6X4
- 6X3
- 6X2* Made to order only
Panel Clips are available which are suitable for all styles of Panel (Except Picket panel which uses an 'L' shaped bracket) 
Closeboard
 Closeboard Panels are a pressure treated , fully framed panel. They are a robust and durable panel, made with 5" wide Feather edge boards and 3" x 1-1/2" rails - these panels are built to last. Prices starting from £16.95+vat.
Available treated Brown or Green in these sizes ; Also available on request are half sizes, i.e 6' Wide - 5'6" or 4'6" Tall.
Curved Closeboard
  Arched Over/Under Closeboard Panels are a pressure treated , fully framed panel. They are a robust and durable panel, made with 5" wide Feather edge boards and 3" x 1-1/2" rails - these panels are built to last. Prices starting from £22.95+vat.
Available treated Brown in these sizes ; Heights are to the heighest points of the panel.
Nottingham
 Nottingham Panels are part of our Continental range and are fully pressure treated (Green) which have morticed & tenoned joints. The slats are screwed to the panel which make these sturdy and robust enough to have plants grow up them. The trellis on top is 300mm tall. Prices starting from £38+vat
**Please note - if you are considering this panel with our concrete gravel boards, please remember that the Nottingham panel is 1800mm wide, where as the concrete gravel boards are Imperial 6'0" - Battons can be supplied to resolve this issue**
Available treated Green in these sizes;
- 1800mm Wide X 1800mm To the heighest point of the panel
- 1800mm Wide X 1050mm To the heighest point of the panel
York Arch
 York Arch Panels are part of our Continetal range. They are fully pressure treated (Green) which have morticed & tenoned joints. The slats are screwed to the panel which make these sturdy and robust enough to have plants grow up them.
Available treated Green in these sizes;
- 1800mm Wide X 1800mm To the heighest point of the panel
- 1800mm Wide X 1200mm To the heighest point of the panel
York Flat
 York Flat Panels are part of our Continetal range. They are fully pressure treated (Green) which have morticed & tenoned joints. The slats are screwed to the panel which make these sturdy and robust enough to have plants grow up them.
Available treated Green in these sizes;
- 1800mm Wide X 1800mm
- 1800mm Wide X 1200mm
Willow
 The willow panel is a fully framed panel, which is pressure treated. The willow cane is untreated. These panels are ideal for garden divides and many other applications. Prices on application.
Available in 6'0" x 6'0" only
Picket Panels
 Picket Panels are available as rounded top as pictured left, Flat top or Pointed top. These panels are made using pickets which are 75mm X 19mm. The pickets are used as 'Hit and Miss' which creates a very robust panel suitable for front and rear gardens .
Available in the following sizes;
- 6'0" Wide X 3'0" High
- 6'0" Wide X 4'0" High
- We can also make special panels, please contact us if required
Concrete Slotted
 Our Slotted posts are reinforced with 4 Metal rods. They are suitable for all Panels sold by us.
Available in the following sizes;
- 10'0" (5"x4" Section)
- 9'0"
- 8'0"
- 7'0"
- 6'0"
- 5'0"
Concrete Mortice
 Our concrete mortice post are reinforced with 4 Steel rods. They are suitable for our 'Shaped' Arris rails & Mortice adaptor brackets.
Available in the following sizes;
- 9'0" (With same spacing of mortice holes as 8'0" post)
- 8'0"
- 7'0"
- 6'0"
- 5'0"
Garden Gates & Furniture
 Cross top gate 900mm X 900mm - Suitable for decking areas & Patios. Available from our Welling branch
 Elite cross top gate 900mm X 900mm - Suitable for decking areas & Patios. Available from our Welling branch
 Nottingham Gate - The perfect match for our Nottingham Panel Range. Available in 1800mm X 900mm only.
 Framed, Ledged and Braced Closeboard gate treated Brown. Made with a 4X2 PAR Kiln dried timber, Sizes are bespoke and made to order . We can round top these gates if required.
 Framed, Ledged and Braced Tongue and Groove gate with Header bar. These are made with PAR timber, which is untreated. We can roundtop these gates if required.
 An assortment of gates. From front to back - P3 Style / Roundtop picket eco / P1 Style. These are a stock item in 900mm X 900mm. They can also be made to measure.
 A typical hinge set, This is a Ringlatch set - Also available are Auto Latch sets & Suffolk Latch sets. Available in Galvanised or Black
|
